45 Degrees ENT Angled Form Stubby 3/4'' Stub Down Electrical Fittings ENT Form Stubby Fittings for Concrete Slab Construction

Us Electric ENT angled form stubbies give crews a clean 45 degree stub down without drilling a single hole in the plywood form. Each stubby locks onto the ENT raceway and holds a low profile in the slab, so the conduit stays where the pour cannot move it. Sizes run from 1/2 inch to 1 1/4 inch and every unit is cULus Listed.

High impact PVC keeps the stubby from cracking when rebar, screeds and pump hoses drag across it during the pour. The material is nonmetallic, nonconducting and noncorroding, so it will not rust in wet concrete and will not add a conductive path to the raceway. The angled body is molded as one piece, with no joint to open under vibration.

Trade sizes cover 1/2 inch, 3/4 inch, 1 inch and 1 1/4 inch ENT tubing, with a true 45 degree angle that keeps the run low in the slab and gives the pull a smooth bending radius. The fitting is cULus Listed for the United States and Canada and is made for ENT raceway in poured concrete. Standard pack is 50 pieces per size.

Drilling form boards for every stub costs a crew real money: the holes leak slurry, the edges catch on rebar, and a misdrilled hole has to be patched before the pour. The angled stubby removes that step. Nail or screw it to the form, push the ENT in, and the 45 degree body leaves the raceway low and protected while the concrete goes down.

cULus Listed by UL, so the mark covers both Canada and the United States and one purchase order can serve either market. Molded in Jiaxing, shipped FOB Ningbo or Shanghai on a 15 to 25 day lead time. MOQ 3000 pieces per size. OEM private label, custom color and printed cartons are available, with samples in 7 days and a submittal package for spec jobs.