Used fora change of direction of the conduit run withthe back hub usually exiting through a wall.
Us Electric PVC Type LB conduit bodies make the 90 degree turn where a run leaves a wall, and the cover sits on the back where the pull happens. Eight trade sizes cover 1/2 inch through 3 inch, each with a cover and screws in the box, and the solvent weld sockets take Schedule 40 and Schedule 80 rigid PVC. All ETL listed.
PVC, not metal. The body is molded from a rigid polyvinyl chloride compound, so there is nothing in the run to rust, nothing to dent when a ladder goes over it and nothing to bond. Nonmetallic also means nonconductive, which keeps the fitting out of the grounding path. The compound is impact modified, so a body in a concrete pour holds its shape instead of going brittle.
Eight trade sizes run 1/2 inch to 3 inch, and the sockets are sized for both Schedule 40 and Schedule 80 rigid PVC conduit. The cover is held by machine screws and lifts off for a pull or an inspection without disturbing the run. PVC conduit fittings are governed by UL 651 and NEMA TC-3, and these units are ETL listed.
An LB is the fitting that saves a pull. Instead of bending the run around a corner or fishing a wall blind, the conduit turns at the body and the wire is pulled through the back opening with the cover off. No threading, no locknuts, no bonding jumper. Screws come in the box, so a crew is not hunting hardware, and a PVC body weighs a fraction of the cast metal version.
ETL listed to the UL 651 and NEMA TC-3 requirements that govern PVC conduit fittings, so submittals and inspection clear on the first pass. Eight trade sizes, MOQ 3000 pieces per size, FOB Ningbo or Shanghai on a 15 to 25 day lead time. OEM private label, custom color and bulk cartons are available, with samples in 7 days and a submittal sheet on request.